Fire-Poof

Fire-Poof Fire Retardant dries clear and must be applied to porous surfaces only, Consistency of water. For Commercial Business in California and NYC, If a, Certificate of Flame-Resistance is required, please call Firetect for specific information. See Product Data Sheet for Additional Information.

For Fire Code Compliance On Other Surfaces, Fire-Poof Must Be Tested By A 3rd Party Certified Laboratory

FABRIC:

Flame retardant for fabric. Covers 200-800 square feet per gallon depending upon the density of the fiber. No odor and non-greasy. Use on most fibers except some acetates, acrylics and nylons. Apply with air sprayer, under 100 PSI. Works excellent on paper, cardboard and other decorative materials. Not For Use On Nylon Acetate Acrylic Or Plastics, Must Be Used On Porous Surfaces Only, Do Not Apply If Surface Has Been Treated With A Stain Or Water Repellent.

WOOD:

For Raw Wood, Interior Use Only.  Must Be Free From Coatings Such As Paint, Sealant Or Dirt, For Class A Or Class 1 Rating, Apply 150 Sq Ft/Gal To Raw Plywood Or 125 Sq Ft/Gal To Raw Lauan, For Class B Or 2 Rating, Apply 150 Sq Ft/Gal On Birch

CARDBOARD & PAPER:

 Apply To All Sides At 195 Square Feet Per Gallon, Thicker Cardboard May Need To Be Submerged, Length Of Dipping Or Spray Time May Vary Depending Upon Thickness Of Surface Until Positive Results Have Been Achieved

Fire-poof Product Data Sheet

Fire-poof Safety Data Sheet

• Interior Use Only
• Ready To Use, Do Not Add Water Or Change Chemical Composition In Any Way. Always Make Sure Cap Stays On Container. Ph=6.5-7.
• Use A Low Pressure Sprayer 100 Psi Or Below Or Product Will Atomize
• Use Fan Spray Tip, Spray Evenly On All Surfaces Allow 24 Hours For Cure Time
• May Need Up To 24 Hrs. To Cure Depending Upon Fiber Characteristics.
• Appearance - Clear, Same Consistency As Water.
• Store Between 40° And 100°F. Shelf Life, 5 Years If Unopened.
• Firepoof Is Water-Soluble. It Is Recommended That All Fabrics Be Dry-Cleaned.
• Do Not Expose To Heat Above 300º F. After Application.
• Certification requires application by a California State Certified Applicator to comply with requirements of the CA State Fire Marshal.
• Water based product, use caution when product comes in contact with metal as it may cause corrosion or rusting.

• See Product Data Sheet For Proper Application Rate And Coverage, Or Contact Firetect For Additional Information

Fabric Approvals: NFPA 701 & CA Title 19 1237.1, No. C-26501, NYC COA #5687, CAN/ULC-S109-03 Small and Large Scale, FAA 25.853, NFPA 260, BFD 1X-1, ASTM E84.

Wood Approvals: Class A / Class 1 ASTM E-84, CA Title 19 1236.4, NFPA 255, UL 723, UBC 42-1

 

Got a big project coming up? Save when you buy 55 gallons or more!

Available in 1 gallon, 5 gallon, 55 gallon drum or 330 totes. Please contact Firetect for drum and tote pricing.

Pricing:
1 gallon- $39.15

5 gallons- $186.30

**Discounts offered with larger quantities!**

Products shipped in Boxes via FedEx 1 day, FedEx 2 day, FedEx Ground, or by courier, depending on destination. Shipping costs and taxes will be calculated at checkout.

*If Address Is Residential and Is Not Noted At Time Of Checkout, Additional Shipping May Be Incurred From Shipping Company And Passed Onto The Customer As An Additional Charge.

1 gallon
Dimensions: 7”x7”x12”
Weight: 10lbs

5 gallon pail
Dimensions: 13”x13”x15.5”
Weight: 50lbs

55 gallon drum
Dimensions: 23”x23”x35”
Weight: 570lbs

Due To Our Inability To Verify That Products Sold Have Not Been Tampered With, All Sales Are Final. We Do Not Accept Returns Or Offer Refunds.

Use only as directed. Sellers and Manufacturers only obligation shall be to replace such quantity of the product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or inability to use the product. The user assumes all risk and liability whatsoever in connection therewith. Any statement or recommendation not contained herein shall have no force or effect unless contained in an agreement signed by officers of seller and manufacturer. Deterioration of coatings applied to interior finishes can occur due to cleaning, atmospheric and other conditions. Fire Retardants shall possess the desired degree of permanency and shall be maintained so as to retain the effectiveness of the treatment under the service conditions encountered in actual use. Periodic testing by a trained official should be performed to insure flame-retardant effectiveness.