WT-103
Clear Matte Flame Retardant Coating
Product Description:
WT-103 is a Class B interior, intumescent, latex, clear, flat coating. Non-hazardous, non-toxic, non-carcinogenic formulation. Application over wood, fiberboard, plasterboard, cardboard, foliage and other decorative surfaces. This product works on many types of surfaces that require a clear, flat flame-retardant coating.
Technical Data:
-
Consistency of paint. Clear, flat coating.
-
Apply two coats of WT-103 at the rate of 200 square feet per gallon. One gallon covers 100 square feet of useable product in two coats.
-
Weight is 60 lbs. per 5-gallon pail.
-
Store between 40°-80°F. Do not freeze. Closed containers exposed to heat may rupture due to pressure.
-
Shelf life is two years if stored properly. Once container is opened, chemical must be used completely.
-
Do not add water or change chemical composition in any way.
-
May be tinted with any water-soluble dispersible tint.
Approvals:
California State Fire Marshal #C-10005, ASTM E84, Meets ANS No. 2.5, NFPA 255, UL No. 723, UBC 42.1 Previously Approved ICBO #3656
Preparation and Application Instructions:
Users of this product must determine the suitability of this product for its intended use.
-
Prepare substrate by sanding and removing any silicone or oil based coating that may be on wood. WT-103 may not adhere to a surface that has not been properly prepared.
-
Applicator must wear paint gloves, goggles and respirator.
-
WT-103 must be mixed well.
-
Apply WT-103 using an air, airless spray, brush or roller. Each gallon contains 100 square feet of usable product. Apply at the rate of 1 gallon per 200 square feet in two coats (1 gallon per 100 square feet). Cover all exposed areas
-
Allow first coat to completely dry before applying second coat.
Clean Up:
WT-103 can be cleaned up with soap and water.