Certified Applicators & Manufacturers of Flame Retardant Saturants & Coating
(800) 380-8801 

Home About Us Contact Us Burn Tests Photos FAQ Fabric FAQ Fire Control Our Products Classes Links

Tel:  (661) 298-8801 
Fax (661) 298-8851
26951 Ruether Ave.,  Unit D
Canyon Country,
California
91351
info@firetect.com

 

Material Safety
Data Sheet
U.S. Department 
of Labor
May be used to comply with Occupational Safety and Health Administration
OSHA's Hazard Communication Standard, (Non-Mandatory Form)
29 CFR 1910.1200. Standard must be Form Approved
consulted for specific requirements. OMB No. 1218-0072

FireSafe Product Sheet  

Section I - FireTect Fire-Safe

Manufacturer's Name: FireTect Emergency Telephone Number: 661-298-8801
Address: 26951 Ruether Avenue
Unit D
Telephone Number for Information:
661-298-8801
Canyon Country, CA 91351 Date Prepared:  01-05-98 Reviewed: 09-01-2006
Hazardous Components 
(Specific Chemical Identity; Common Name(s))
OSHA PEL ACGIH 
TLV
Other Limits
Recommended


(optional)

Section II - Hazard Ingredients/Identity Information
FireTect Fire-Safe - Non-Hazardous Coating (water based flame retardant solution)
VOC: 0 grams per liter 
Non-Hazardous, Non-Flammable, Non-Toxic
NFPA: Hazardous 0 Flammability 0  Reactivity 0
Section III - Physical/Chemical Characteristics
Boiling Point 200°F Specific Gravity (H2O = 1)
 
 1.08
Vapor Pressure (mm Hg.) ---- Melting Point  None
Vapor Density (AIR = 1) ---- Evaporation Rate
(Butyl Acetate = 1)
 1
Solubility in Water: Complete
Appearance and Odor: Clear solution, Faint odor

Section IV - Fire and Explosion Hazard Data

Flash Point (Method Used): None Flammable Limits LEL UEL
Extinguishing Media: None 
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None
(Reproduce locally) OSHA 174, Sept. 1985
Section V - Reactivity Data
Stability Stable X Conditions to Avoid: None
Incompatibility (Materials to Avoid)
Hazardous Decomposition or Byproducts
Hazardous Polymerization Will Not Occur X Conditions to Avoid: None
Section VI - Health Hazard Data
Route(s) of Entry: Inhalation? Skin? Ingestion?
 
Health Hazards (Acute and Chronic): Contact with skin and eyes can cause local irritation.
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
Signs and Symptoms of Exposure: Local irritation
Medical Conditions Generally aggravated by Exposure: Ingestion of large quantities may cause symptoms of non-specific irritation of gastrointestinal tract, nausea, vomiting, seek medical attention.
Emergency and First Aid Procedures: If swallowed, induce vomiting, seek medical attention. In case of eye contact,  flush with running water for at least 15 minutes. If irritation persists, seek advice of a physician.

Section VII - Precautions for Safe Handling and Use

Steps to Be Taken in Case Material is Released or Spilled: Flush with large volumes of water.
Waste Disposal Method: Flush with large volumes of water. 
Precautions to Be taken in Handling and Storing: Storage should take place in a cool, dry, ventilated area.
Other Precautions

Section VIII - Control Measures

Respiratory Proctection (Specify Type): Wear mask during spraying.
Ventilation Local Exhaust: Sufficient Special
  Mechanical (General) Other
Protective Gloves: May be used. Eye Protection: May be used.
Other Protective Clothing or Equipment
Work/Hygienic Practices: Area should be well ventilated.
Page 2 * U.S.G.P.O.: 1986 - 491 - 529/45775